Home page

HGJ-70 argon arc welded pipe production line

The production line can produce metal sheaths for railway signal cables, flexible fireproof cables, medium-voltage cables, high-speed rail copper alloy through-ground wires and other cables. After the clean copper strip (or aluminum strip or stainless steel strip) is accurately cut, it is formed by longitudinal wrapping through a special mold for welding and forming, and the continuous butt longitudinal seam welding is carried out under the protection of inert gas, and the product is formed by stretching and sizing.

Classification:

RTTZ, BTLY flexible fireproof cable production equipment

keyword:

Wire、Machinery

Hotline:

18623429350

Inquiry

Detailed Description

■Production line use:

■The main technical parameters of the production line

◆ Working screen display: display the main parameters, such as welding current, welding voltage, welding speed, welding length, etc.;

◆ Human-machine interface to set process parameters, current and speed synchronization curve: built-in multiple sets of mature process parameters, each group of process parameters can be adjusted multiple parameters; The system can permanently store the process parameters of welded pipes of various specifications. The saved parameters can be used next time, and the diameter of the welded pipe and the type of strip can be entered, and the corresponding process parameters can be directly called.

◆ It has welding short-circuit protection, and the welding torch position is too low and too high;

◆ It has excessive speed fluctuation and protection against mismatch between speed and current;

◆Air pressure, cooling water pressure warning protection.

◆ It has the protection of too large and too small tension of pay-off and take-up;

◆Each device of the device has a separate power control button directly on the touch screen, and there is power status protection monitoring.

1. The total installed capacity of the equipment is < 70KVA, use less than 4OKVA; Power supply three-phase five-wire system, 400V/50Hz~60Hz; The ambient temperature is 5-450C, the relative humidity of the environment is 95%, and there is no condensation.

2. Shielding gas: ammonia, argon; Helium flow rate 160-250L/H, argon flow rate 50-80LH; (The pressure of the standard gas cylinder is 15MPa, and the gas use time is about 10 hours).

3. Working gas pressure:> 0.6Mpa; Water consumption< 1 m³/h.

4. The operation direction of the device, the right mobile phone, facing the device, put left and right to close. The center of the equipment is 1 m high, the production line is about 30 m, the width is 5 m, and the height is 3 m.

Previous： Weld tracking system

Next： None

More equipment